Dynam DHC-2 Beaver 1500mm (59") Wingspan - PNP - DY8961
- Product condition: Factory New
- Missing parts: None
- Damage/defects: The very end of the fuselage (tail section) is broken off (about a 3" piece). It's a clean break that will be easy to repair with CA or epoxy.
The de Havilland Canada DHC-2 Beaver is a single-engined, high-wing, propeller-driven, STOL aircraft developed by de Havilland Canada, primarily known as a bush plane. It is used for cargo and passenger hauling, aerial application (crop dusting and aerial topdressing), and has been widely adopted by armed forces as a utility aircraft. The United States Army purchased several hundred; nine DHC-2s are still in service with the U.S. Air Force Auxiliary (Civil Air Patrol) for search and rescue. The Beaver was designed for flight in rugged and remote areas of the world. Its short takeoff and landing capability made it ideal for areas normally only accessible by canoe or foot. Because it often flies to remote locations, often in cold climates, its oil reservoir filler is located in the cockpit and oil can be filled in flight.
Take to those rugged lakes and ponds close to your personal wilderness with Dynam's 1500mm (59") PNP DHC-2 Beaver! All you need is a 5 channel radio, 5 channel receiver and 4S 14.8V 2200mAh Li-Po battery and you're ready to master those water-based environments less traveled! Or if you prefer land-based operation, the DHC-2 Beaver also comes with landing gear.
Features:
- Realistic scale features including DHC-2 paint scheme and molded panel lines
- Set of floats with operational rudders for water takeoffs/taxiing and landings
- Powerful BM3720A-KV650 Brushless Outrunner motor
- Fixed landing gear included for land-based operation
- LED navigation lights add scale realism and help make the plane more visible during dawn and dusk flights
Includes:
- Dynam DHC-2 Beaver 1500mm (59") Wingspan - Receiver Ready
- ESC with T connector, servos and motor come pre-installed for your convenience
- Set of floats with operational rudder
- Set of regular landing gear
Requires:
- Minimum 5 Channel Radio - Click Here for recommendations
- 5 Channel Receiver - Click Here for recommendations
- 4 Cell 14.8V 2200 mAh LiPo Battery - Click Here for recommendations
- Lipo Battery Charger - Click Here for recommendations
    
|
FEATURE VIDEO: Dynam DHC-2 Beaver 1500mm (59") Wingspan - PNP Flight Review from Motion RC |
Wingspan |
1500mm / 59.06in |
Length |
958mm / 37.7in |
Flying Weight |
1400-1750g / 49.4-61.8oz |
| CG (Center of Gravity) | 45 - 50mm from the leading edge at the wing root |
Power System |
BM3720A-KV650 Brushless Outrunner Motor |
Electronic Speed Control |
50A Brushless with T connector |
Propeller / EDF |
2-Blade Prop |
Servos |
5x 9g standard |
| Landing Gear | Floats and Fixed |
Required Battery |
4S 14.8V 2200mAh 25C LiPo (required) |
Required Radio |
5 Channel (required) |
| Ailerons | Yes |
Elevator |
Yes |
| Rudder | Yes |
Flaps |
Optional (requires 1 forward and 1 reverse 9g servo) |
Lights |
Yes |
Hinge Type |
Foam |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 2-3 Hours |
| Recommended Environment | Outdoor |
BONUS VIDEO: Dynam ESC Setup Timing and Programming from Motion RC |